BLYNK BRIDGE (мост) и upgrade (обновление) умного сетевого WI-FI удлинителя.



#wemosd1, #pir, #умныйдом, #управлениенагрузкой, #nodemcu, #esp8266, #smarthouse, #BLYNK, #фоторезистор, #датчикдвижения
Управление умным сетевым WI-FI удлинителем с помощью другого микроконтроллера и подключенных к нему датчиков.

DiY проект WI-FI реле BLYNK
ЧАСТЬ №1 -https://youtu.be/lCnNanKTbb0

Для управления добавлена кнопка “МОСТ”:
– при включении кнопки, умный сетевой удлинитель принимает управление от другого микроконтроллера.
– при выключении кнопки, умный сетевой удлинитель не принимает управление от другого микроконтроллера.

В качестве примера добавлены два датчика (датчик освещенности и датчик движения) и 3 условия.
Вторая страничка в приложении BLYNK (второй проект)
Красный светодиод свидетельствует о срабатывании датчика движения.
Зеленый светодиод сообщает о низкой освещенности (темно) от датчика освещенности.

1-ое условие: кнопка “ВКЛ” датчика движения — умный сетевой WI-FI удлинитель включает нагрузку при срабатывании датчика движения.
2-ое условие: кнопка “ВКЛ” датчика освещенности — умный сетевой WI-FI удлинитель включает нагрузку при низкой освещенности (если темно).
3-ие условие: обе кнопки “ВКЛ” (датчика движения и датчика освещенности) — умный сетевой WI-FI удлинитель включает нагрузку при одновременном выполнении 1-ого и 2-ого условия.

По всем вопросам обращайтесь в группу вконтакте:
https://vk.com/arduinomarket source

Blynk Makes Creating Mobile Apps to Power Arduino or Raspberry Pi Projects a touch More convenient

Android/iOS: If you hope to manipulate a Raspberry Pi or Arduino connected device from your mobile, you would generally be required to know at the very least some programming. Blynk is an smartphone app that makes it easier to manage those electronics from your mobile phone.

Blynk employs drag-and-drop widgets that may help you command different elements of your electronics projects. This could imply LED values, servo speeds, or only checking in on a variety of data. You may check out the service completely free, but nonetheless , you will have to invest some dough in cases where you hope to make your applications open public or utilize it on quite a few varied devices. The majority of us should be all right with the cost-free plan though, at a minimum to get going. If you’ve ever wished to connect your diverse electronics projects to your mobile but nonetheless , didn’t feel like undergoing the difficulties of actually doing an software app, Blynk would possibly accomplish the same goal.

Based on: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Web-site http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

These Resources Might Help

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, and many others. https://github.com/blynkkk/blynk-library

Creating a Blynk Local Server In Windows



A tutorial on creating Blynk Local server. Please find the links for the files below. Skip the certificates generation part. With the latest servers, you do not need the certificates

Blynk Server File: https://github.com/blynkkk/blynk-server/releases

JavaJDK:
http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html

Server Properties File:
https://raw.githubusercontent.com/blynkkk/blynk-server/master/server/core/src/main/resources/server.properties

Mail Properties FIle: https://raw.githubusercontent.com/blynkkk/blynk-server/master/server/notifications/email/src/main/resources/mail.properties

Blynk Aurdino Library Files: https://github.com/blynkkk/blynk-library/releases/latest source

Blynk Helps Make Developing Mobile Phone Applications to Power Raspberry Pi or Arduino Projects slightly Simpler

Android/iOS: When you would like to control a Raspberry Pi or Arduino connected device from your cellphone, you would usually be required to understand at minimum some programming. Blynk is an app that makes it simpler to handle those devices from your phone.

Blynk works by using drag-and-drop widgets to allow you to manipulate an assortment of parts of your electronics projects. This may imply LED values, servo speeds, or simply just checking in on a variety of data. You can check out the service at no charge, but you’ll need to pay some bucks in cases where you wish to make your applications public or apply it on a bundle of different devices. Most people ought to be ok with the free plan though, at a minimum to start out. If you’ve ever needed to connect your diverse electronics projects to your cellphone but didn’t want facing the complications of actually creating an application, Blynk might work.

Derived from: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Website http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

Those Resources Could Help

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, etcetera. https://github.com/blynkkk/blynk-library

Blynk – Como instalar e utilizar a biblioteca na IDE Arduino



Como instalar e utilizar a biblioteca na IDE Arduino source

Blynk Makes Creating Mobile Phone Applications to Power Arduino or Raspberry Pi Projects a touch Easier

Android/iOS: When you hope to manipulate a Raspberry Pi or Arduino connected device from your phone, you would usually be required to know at minimum some coding. Blynk is an software app that makes it easier to operate those devices from your mobile.

Blynk employs drag-and-drop widgets that may help you operate different items of your electronic projects. This can imply LED values, servo speeds, or only checking in on a variety of data. You could check out the service free of charge, but nonetheless , you’ll need to ante up a few bucks if you would like to make your mobile apps public or make use of it on many different devices. Most people should be alright with the cost-free plan though, at the least to get started. If you’ve ever needed to connect your different electronics projects to your phone but nevertheless , didn’t want going through the issues of actually generating an mobile app, Blynk would possibly have the desired effect.

Origin: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Web-site http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

These Information Could Help you

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, and the like. https://github.com/blynkkk/blynk-library

More Driving of the wifi blynk esp8266/nodemcu robot



Blynk_App more of driving the Wifi Robot esp8266 nodemcu source

Blynk Helps Make Developing Mobile Apps to Power Raspberry Pi or Arduino Projects a Little More convenient

Android/iOS: In cases where you want to control a Raspberry Pi or Arduino connected device from your cellphone, you would commonly be required to understand at the least some programming. Blynk is an software app that makes it simpler to manage those devices from your mobile phone.

Blynk makes use of drag-and-drop widgets to help you command a range of items of your electronic projects. This could suggest LED values, servo speeds, or perhaps just checking in on a variety of data. You are able to check out the service at no cost, nevertheless , you’ll need to pay out some money in case you want to make your apps open public or make use of it on quite a few different devices. Most of us should be all right with the free plan though, at a minimum to get going. If you have ever wished to connect your diverse electronics projects to your cellphone but didn’t feel like going through the issues of actually generating an smartphone app, Blynk would probably do the job.

Depending on: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Web Site http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

These Resources Might Help you

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, and so forth. https://github.com/blynkkk/blynk-library

Using Blynk and Raspberry Pi to control an 8 port relay



Just a short tutorial on the finishing steps to control an 8 port relay with Blynk on your Raspberry Pi and smartphone.

Check out the starter video n how to get the Pi ready for Blynk and Wiring Pi:
https://www.youtube.com/watch?v=ZJcYiSFiMY8 source

Blynk Helps Make Developing Mobile Apps to Power Arduino or Raspberry Pi Projects a little bit Simpler

Android/iOS: In case you desire to handle a Raspberry Pi or Arduino connected device from your phone, you’d typically have to know at a minimum some programming. Blynk is an software app that makes it simpler to manage those electronics from your smartphone.

Blynk makes use of drag-and-drop widgets to aid you to manage different items of your electronic projects. This might mean LED values, servo speeds, or perhaps just checking in on a variety of data. You may check out the service for free, but nevertheless , you will need to spend some cash if you desire to make your mobile apps public or put it to use on a bundle of different devices. Some of us ought to be ok with the free plan though, at minimum to get going. If you have ever wanted to connect your different electronics projects to your phone but nonetheless , didn’t feel like going through the difficulties of actually doing an software app, Blynk would probably work.

Dependent upon: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Website http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

These Resources Might Help

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, and so on. https://github.com/blynkkk/blynk-library

NodeMcu Esp8266 + blynk app.



source

Blynk Makes Creating Mobile Phone Applications to Power Raspberry Pi or Arduino Projects a tad Simplier and easier

Android/iOS: When you hope to handle a Raspberry Pi or Arduino connected device from your mobile phone, you’d usually have to learn at minimum some coding. Blynk is an mobile app that makes it easier to keep control of those devices from your phone.

Blynk works by using drag-and-drop widgets to guide you to command different elements of your electronic devices projects. This may imply LED values, servo speeds, or simply checking in on various data. You may check out the service at no charge, but nonetheless , you’ll need to ante up a few bucks in case you hope to make your applications public or apply it on a variety of different devices. The majority of us ought to be alright with the cost-free plan though, at the least to begin. If you’ve ever planned to connect your various electronics projects to your mobile phone but didn’t feel like encountering the hardship of actually developing an mobile application, Blynk could possibly get the job done.

Based upon: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Site http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

Those Tips Could Guide you

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, etc. https://github.com/blynkkk/blynk-library

WEMOS D1 mini + L9110s + BLYNK = LED Dimmer (управляем яркостью свечения LED панели по WI-FI)



LED panel Dimmer – WEMOS D1 mini подключаем драйвер двигателя L9110s

Управление по WI-FI яркостью светодиодной панели с помощью приложения BLYNK, драйвера шагового двигателя L9110s и микроконтроллера на базе ESP8266 12e.

http://goo.gl/Q2Xe1R – Кэшбек (возврат денег) 7% – от каждой покупки на AliExpress source

Blynk Makes Composing Mobile Apps to Power Arduino or Raspberry Pi Projects a bit Less difficult

Android/iOS: In cases where you would like to control a Raspberry Pi or Arduino connected device from your phone, you would typically need to understand at a minimum some programming. Blynk is an app that makes it easier to operate those things from your mobile.

Blynk employs drag-and-drop widgets to assist you control an assortment of items of your electronics projects. This can imply LED values, servo speeds, or even simply checking in on a variety of data. You are able to check out the service for nothing, but nevertheless , you will have to pay some funds if perhaps you like to make your apps public or apply it on a few different devices. Some of us ought to be alright with the costless plan though, at minimum to get started. If you’ve ever planned to connect your various electronics projects to your phone but nevertheless , didn’t feel like under-going the challenges of actually developing an app, Blynk would probably work.

Dependent on: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Website http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

These Resources Could Help you

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, etc. https://github.com/blynkkk/blynk-library

The beginning of my home automation project with NodeMCU and Blynk



Here is the “hello world” (blink) test as my first program written to my NodeMCU microcontroller running via the ESP8266 WiFi board.

I’ll be working on a group project to make a home automation device. Can’t wait!!!

=================================================

Thanks for watching! Please comment, like, and subscribe to our channel. If you want to see the content grow and get even better, please support us at Patreon!
https://www.patreon.com/MakeItHackin

For more places to watch and interact, check out:
https://www.MakeItHackin.com
https://www.Facebook.com/MakeItHackin

https://www.instagram.com/MakeItHackin source

Blynk Helps Make Creating Mobile Phone Applications to Power Arduino or Raspberry Pi Projects a bit Less difficult

Android/iOS: In the event that you would like to keep control of a Raspberry Pi or Arduino connected device from your mobile phone, you would typically have to learn at least some programming. Blynk is an mobile application that makes it simpler to keep control of those devices from your mobile.

Blynk utilizes drag-and-drop widgets to assist you manage all sorts of parts of your electronics projects. This might imply LED values, servo speeds, or simply just checking in on a variety of data. You may check out the service cost free, but nonetheless , you will need to ante up some funds in the event that you hope to make your apps public or put it to use on a multitude of different devices. Many of us ought to be all right with the costless plan though, at the least to start. If you’ve ever needed to connect your multiple electronics projects to your mobile phone but didn’t want suffering through the issues of actually creating an application, Blynk would probably have the desired effect.

Based upon: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Website http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

Such Assets Could Help you

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, and so on. https://github.com/blynkkk/blynk-library

kết nối nodeMCU 0.9 với BLYNK



http://arduino.esp8266.com/stable/package_esp8266com_index.json source

Blynk Makes Composing Mobile Apps to Power Arduino or Raspberry Pi Projects slightly More convenient

Android/iOS: In cases where you need to manage a Raspberry Pi or Arduino connected device from your phone, you would commonly ought to learn at least some programming. Blynk is an application that makes it easier to operate those gadgets from your device.

Blynk takes advantage of drag-and-drop widgets to aid you to manage assorted parts of your electronic projects. This may mean LED values, servo speeds, or simply just checking in on a range of data. You may check out the service completely free, however , you’ll have to shell out some coinage if you desire to make your mobile apps open public or make use of it on a variety of varied devices. Most of us should be fine with the free plan though, at the least to start. If you have ever desired to connect your multiple electronics projects to your phone but nevertheless , didn’t want under-going the trouble of actually doing an mobile application, Blynk would get the job done.

Founded upon: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Website http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

Such Tips Might Help

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, and many more. https://github.com/blynkkk/blynk-library

Blynk con RGB y NodeMCU v3



Controlar RGB con blynk y Arduino nodeMCU v3. source

Blynk Makes Creating Mobile Phone Applications to Power Arduino or Raspberry Pi Projects slightly Easier

Android/iOS: In cases where you desire to control a Raspberry Pi or Arduino connected device from your phone, you would usually need to understand at the very least some coding. Blynk is an software app that makes it easier to manipulate those things from your mobile.

Blynk makes use of drag-and-drop widgets that will help you handle different parts of your electronics projects. This could mean LED values, servo speeds, or only checking in on a variety of data. You are able to check out the service free of charge, but nevertheless , you’ll need to pay out some funds in cases where you wish to make your great apps public or make use of it on quite a few varied devices. Most people should be fine with the cost-free plan though, at the very least to start. If you have ever needed to connect your assorted electronics projects to your phone but didn’t feel like dealing with the difficulties of actually creating an mobile application, Blynk would possibly get the job done.

Founded upon: http://lifehacker.com/blynk-makes-creating-mobile-apps-to-power-arduino-or-ra-1791446978

Blynk Official Website http://www.blynk.cc/
Download via Apple Store https://itunes.apple.com/us/app/blynk-control-arduino-raspberry/id808760481?ls=1&mt=8
Download Via Google Play https://play.google.com/store/apps/details?id=cc.blynk

Those Resources Could Help

THE JOY OF THE ESP8266 AND BLYNK http://hackaday.com/2016/12/01/the-joy-of-the-esp8266-and-blynk/

COMO ECONOMIZAR áGUA COM A SPARKFUN BLYNK BOARD http://blog.filipeflop.com/wireless/economizar-agua-sparkfun-blynk-board.html

Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, and many others. https://github.com/blynkkk/blynk-library